1
10 Parts Check List The following parts are included with the Spectrum PLUSTM SP550: NOTE: Spectrum PLUSTM Line Cords are 6-Pin 6-Conductor Line cor
11 Power Outlet Configuration The Spectrum PLUSTM Series telephone requires external power from a standard 120V outlet (60Hz). Caution • Never in
12 120V AC Outlet Recovery Power Adapter (provided) The 120 VOLT AC OUTLET RECOVERY POWER ADAPTER is an featured TeleMatrix product. It provides both
13 Completing the Power Installation If the installation is correct, the information shown at the right will be displayed on the LCD.
14 Connecting the Handset Cord A 10-foot modular coil handset cord is provided. (Be sure that the wall/desk elevation stand has not been attached
15 Wall Mounting the Spectrum PLUSTM Telephone To install the wedge for desk mounting, be sure the lock mechanism is positioned to the left clear of t
16 Message Waiting Light Indicator The Spectrum PLUSTM telephone has a Message Waiting (MW) Light Indicator (figure 1). The indicator will
17 System Hold Feature Option Switch A feature switch for different hold functions is located on the bottom of the phone. The switch options are
18 The Spectrum PLUSTM requires simple initial programming to set up the telephone. One program mode is designed for Administrator set up and one prog
19 The Spectrum PLUSTM requires simple initial programming to set up the telephone. The program is designed for one Administrator and one or more user
2 CAUTION! • Never install telephone wiring during a lightning storm. • Never install telephone jacks in wet locations unless the jack is specific
20 STORE Programming is initi-ated by quickly press-ing the “STORE” key. SETUP MONTH:01 SETUP DAY:01 AM=1 PM=2 SETUP HOUR:01 SETUP MINUTE:01
21 LIVE DIALPAD XXX PRESS 1=ON 2= OFF Set up using keypad dialing with automatic speaker activation or using key pad dialing and pressing dial key t
22 RESTRICT 1+ Long distance restriction. Restrict any outgoing number dialing that be-gins with a “1” . PRESS 1=ON 2= OFF Restrict 1+ Feature (
23 Using A Flash When Dialing To use a Flash when dialing, simply press the “FLASH” key at the appropriate point in the number sequence being dialed
24 Programming Flash Timing (Administrator) Flash timing can be programmed for different timing options listed below. 1. Press and hold the “STOR
25 Programming Pause Timing (Administrator) A Pause time between 1.0-seconds to 5.0-seconds can be programmed into mem-ory. This function allows for
26 Programming a Pause into Speed Dial Memory (Administrator) Pause(s) can be programmed into the speed dial memory. This function puts a delay the d
27 Programming the Access Number into Memory (Administrator) In some cases, a digit or digits are required to access an outside line (i.e. 9) . The
28 Programming the Area Code into Memory (Administrator) An Area Code can be programmed into the phone memory. The Area Code is pro-grammed into memo
29 Programming Voice Mail (Administrator) Voice Mail (VM) access numbers and their associated “Personal Identification Number” (PIN) can be programme
3 Congratulations on the purchase of your TeleMatrix Spectrum PLUSTM model SP550 Caller ID telephone. The Spectrum PLUSTM SP550 includes advanced fea
30 Programming Voice Mail (Administrator) To program the Spectrum PLUSTM one touch “MESSAGE WAITING” speed dial key, follow these programming instru
31 To Program Speed Dial Locations 1. Press and hold the “STORE” key quickly. The words “SET UP MONTH: 01” will appear (figure 1). 2. Next, press th
32 To Verify Speed Dial Programming (Administrator) The contents of each speed dial location can be verified or “checked” while the Spectrum PLUSTM
33 To Program a Phonebook Record Manually 1. Press the “STORE” key quickly. The words “SETUP MONTH:01” will appear (figure 1). 2. Press the “PHONEBO
34 Transferring Caller Log Records into Phonebook Memory 1. Be sure the LCD display is in the beginning position and no feature is in use. A call
35 Press Keypad: Once Twice Three Times Four Times Five Times Key 1 1 Key 2 A B C 2 Key 3 D E F 3 Key 4 G H I 4 Key 5 J K L
36 Headset Feature The Spectrum PLUSTM is equipped with a separate port for plugging in an optional headset. The port is located on the bot-tom of t
37 Using A Headset The “HEADSET ON/OFF” key controls the activation of the Headset. When using the headset feature, the handset remains on-hook at a
38 NOTE: The LCD display backlighting feature is activated after receipt of the first ring or with in-use operation of the handset, headset activat
39 Caller Identification (Caller ID) LCD Display Adjustments LCD Tilt Angle Feature The LCD can be tilted upward for direct viewing and easy reading.
4 Features ... 5 Controls ……...
40 LCD (Caller ID* Display) Featured Icons MO1 Caller Name 03:58 03 Caller Number 12/01 PM12:00 CW Dial Delete
41 DOWN Key Used to Scroll LCD Records Downward UP Key Used to Scroll LCD Records Upward Used to Enter Phonebook Used to Delete Caller Log Record o
42 LCD (Caller ID* Display) Information when On Hook (Without Messages) NEW TOTAL -000- -000-
43 LCD (Caller ID Display) Information when On Hook (with Messages) NEW TOTAL -002- -003-
44 IN USE 12/01 PM12:00 Dial Delete PhBook LCD (Caller ID* Display) Information when Dialing IN USE
45 LCD (Caller ID* Display) Information when Receiving Incoming Call PERSONS NAME PERSONS NUMBER 12/01 PM12:00 Dial Delete PhBook IN U
46 The Spectrum PLUSTM LCD display supports Type II Caller ID*. This type of Caller ID displays the identity of a second incoming call while the user
47 Setting Date & Time Manually The Spectrum PLUSTM Date & Time functions are user/installer programmable. The Date & Time can
48 Caller ID Storage Capacity The Spectrum PLUSTM Caller ID will store 100-records (numbers and names). When memory is full, the oldest of the 100th
49 The “DIAL” key allows the user to call back either stored records or the displayed number on the LCD. A displayed number on the LCD comes from inco
5 • One Line Operation • SteelTrapTM Memory Technology (No Batteries Required) • FreeSpeechTM Talk Feature: Allows Free Toggle between Handset, Hea
50 Delete Individual Stored Call Record 1. Press the “↑” or “↓” key to activate stored memory. The LCD screen will display a record. Use the “↑”
51 Adding a Phonebook Record From a Caller ID Record Adding a Caller Record To The Phonebook 1. Press the “↑” or “↓” key to activate stored memory.
52 Adding A Phonebook Record Manually Manually Adding A Phonebook Record Into Memory 1. The phone must be ON-HOOK (in the cradle). 2. Press the “ST
53 To Dial From the Phonebook Directory 1. Press the “PhBook” key to enter into the Phonebook mode. 2. To locate the desired record, Scroll the “↑”
54 To Add Characters to the Displayed Number 1. Press the “↑” or “↓” key to activate the display for scrolling. 2. Scroll the “↑” or “↓” key to f
55 “No Calls” Display This message will display when there are no call records received since last using the Caller ID fea-tures menu when the “↑” o
56 Speaker Line Indicators When the “SPEAKER” key is acti-vated, the in-use light illuminates steadily RED above the “SPEAKER” key. The LCD will disp
57 Placing a Call Using the Speakerphone The Spectrum PLUSTM is equipped with a high quality speakerphone feature to allow for hands-free operation.
58 Using the Data Port The Spectrum PLUSTM is equipped with a convenient data port on the bottom of the base unit. This modular receptacle is used t
59 Using the Hold Feature The “HOLD” key is used to place a caller on hold. To use, simply press the “HOLD” key. The LED above the “HOLD” key will
6 TOP PANEL (14)(17)(15)(19)(18)(16)(2)(3)(4)(5)(6)(7)(1)(12)(9)(13)(10)(11)(8)Volu meContrast
60 Using The Mute Feature A “MUTE” key is provided to allow privacy during a background conver-sation. When the “MUTE” key is ac-tivated, the mi
61 Using the Redial Feature The “REDIAL” key is used to automatically redial the last number that was dialed from the keypad. To use: • Lift the
62 Using The Disconnect Feature Key The “DISC” (DISCONNECT) key is a 2-second electronic timed line break. The key can be used to automatically han
63 Handset Volume Control The Spectrum PLUSTM is equipped with an ADA/FCC compliant handset volume control located on the front of the phone. When
64 Keep the telephone dry. If it gets wet on the outside, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circ
65 When problems arise during installation or service that cannot be resolved using this or related documents, contact the TeleMatrix Prior-ity Care D
66 STATEMENT OF LIMITED WARRANTY TeleMatrix, Inc. (TMX) warrants to its [original end customer] [purchaser] that Spectrum and Marquis branded product
67
7 1. Speed Dial Feature Keys……………..… Eleven (11) one-touch keys used for speed dialing. 2. Disconnect Key ……………………...…….. Used to disconnect the l
8 BOTTOM PANEL
9 1 Data Port ......... Convenient port to connect a computer, modem, fax or answering device. 2 Line Jack …
Comentários a estes Manuais